Product details

10ml

51b2OMcodnLSL1001

51kU2Q8kWwLSL1500

71gr57voLKLSL1500

71XnE1OG7PLSL1500

716l3KibTyLSL1500

Product Features

10ml/cc Disposable Syringe with Needle Properties

Product Type: Disposable syringe with needle, nominal capacity 10ml (10cc), non-toxic, latex-free, and DEHP (diethyl phthalate)-free.
Material Selection:
Barrel/Plunger: Medical-grade polypropylene (PP). This material was chosen for its chemical resistance (factory material compatibility testing in 2023 showed compatibility with 98% of common antibiotics and disinfectants) and low deformation (≤0.3% deformation after immersion in 40°C saline for 24 hours).
Needle: 304 stainless steel (surface electropolished), sharpness ≥ 4.5N (compliant with ISO 7864). The electropolishing process reduces tissue damage. A test of 500 cattle injections on a Brazilian farm showed an average injection time reduction of 2 seconds compared to standard stainless steel needles. Sealing gasket: Thermoplastic elastomer (TPE), meets USP Class VI biocompatibility standards - no allergic reactions have been observed in 10,000+ clinical trials, suitable for sensitive groups such as pediatrics (10ml dose split use) and elderly patients.

Basic parameters

Parameter Category	Specification Details	Compliance & Data Support
Volume & Accuracy	Nominal capacity: 10ml; graduated increments: 0.2ml (0.2–10.0ml); volume error: ≤±3%	Exceeds the maximum allowable error of ±5% specified in ISO 7886-1; tested by SGS, 99.8% of samples meet error requirements.
Needle Specifications	Standard configuration: 21G × 1.5" (inner diameter: 0.8mm × length: 38mm); optional: 20G/22G	21G is selected as the standard because it balances flow rate (1.2ml/s for normal saline) and tissue penetration (suitable for intramuscular injection in cattle, pigs, and adult humans).
Sterility Performance	Ethylene Oxide (EO) sterilization; Sterility Assurance Level (SAL): 10⁻⁶; residual EO: ≤8μg/g	Complies with ISO 11135; 100% sterility sampling is conducted for each batch (100 units per batch), with no non-conforming batches in 2024.
Leakage Resistance	Withstands 300kPa pressure for 1 minute without leakage; leakage rate: <0.01%	Tested by the factory's online leak detector (detection speed: 120 units/minute); lower than the industry average leakage rate of 0.05%.
Mechanical Durability	Plunger pushing force: 18–22N; needle pull-out force: ≥25N	The plunger force meets ISO 7886-1 (≤25N), reducing hand fatigue during repeated use; the needle pull-out force prevents detachment when livestock struggle.
Packaging	Individual sterile PE pouch (130mm×200mm); 1200units per carton (outer carton dimensions: 65×45×30cm)	The pouch material complies with ISO 11607 and features a tamper-evident seal-peeling success rate ≥95% (no pouch tearing), facilitating quick opening in clinics.

Characteristics of 10ml/cc disposable syringe (including needle):
Moderate capacity: A capacity of 10ml is suitable for various medical purposes, such as injecting drugs, extracting liquids, etc. It can meet the general dosage requirements without causing waste or inconvenience due to excessive capacity.
Aseptic design: Ensure hygiene and safety in medical operations, reduce the risk of infection, and comply with medical aseptic standards.
Matching needles: usually equipped with needles of different specifications to meet different injection needs, such as subcutaneous injection, intramuscular injection, etc. The length and diameter of the needles can be selected according to specific purposes.
Lightweight material: It is mostly made of medical plastic material, which is lightweight, easy to operate and carry, and has good flexibility and chemical resistance, able to withstand the corrosion of drugs.
Comfortable operation: Designed ergonomically, comfortable to grip, easy to operate, reducing discomfort for medical staff and patients.
Disposable: To avoid cross infection, it can be discarded directly after use without the need for cleaning and disinfection, saving medical resources and time.
Wide applicability: Not only applicable to medical institutions such as hospitals and clinics, but also widely used in fields such as home care and scientific research experiments to meet diverse medical needs.

Core application of 10ml/cc Disposable Syringe with Needle

1. Drug injection and administration

Mainly used for intramuscular injection, intravenous injection, or subcutaneous injection in hospitals, clinics, and home care.
Suitable for medium dose drug delivery, commonly used for injection of antibiotics, analgesics, vaccines, etc.

2. Clinical sampling and testing

Can be used to extract blood or body fluid samples to meet laboratory testing and diagnostic needs.
Its scale is clear and the capacity is moderate, suitable for sampling operations in clinical routine examinations.

3. Rinsing and debridement

In medical care, 10ml syringes are commonly used for flushing wounds, urinary catheters, and drainage tubes.
Provide precise liquid output, reduce tissue damage, and enhance cleaning effectiveness.

4. Oral and Dental Applications

Used for flushing operations in dental treatment, such as root canal flushing, postoperative cleaning, etc.
Combined with a needle or flushing tube, it can effectively clean small areas.

5. Veterinary and Laboratory Applications

Used for drug injection, liquid feeding, and reagent distribution in animal medicine and scientific research experiments.
Its 10ml capacity meets the common therapeutic dose requirements for small and medium-sized animals.

6. Medical Beauty and Dermatology Applications

Can be used for high-dose filling and injection of hyaluronic acid, botulinum toxin, nutrient solution, etc.
Commonly used in clinical dermatology and beauty clinics.

7. Industrial and non-medical use

10ml disposable syringes with needles are also widely used in laboratories, chemical analysis, precision liquid measurement, and packaging.
Suitable for precise dripping of scientific research, industrial lubricants or adhesives.

JYK's Advantages

Automated Production Line:
Supports mass production of millions of units per day, meeting large-scale order demands (such as vaccinations and hospital procurement).
Lightweight design (plastic instead of metal) reduces transportation and storage costs, making it suitable for global export.
Price Competitiveness: Large-scale production reduces costs, resulting in a competitive price compared to imported brands (price comparisons or case studies available).
Original Equipment Manufacturing (OEM/ODM) customization is supported, allowing us to adjust needle specifications (e.g., 16G-30G) and packaging formats (boxed/bulk) to meet customer needs.

Market Adaptability and Innovation:
Diverse Applications:
Suitable for high-precision applications such as chemotherapy drug administration, vaccinations, and biologic injections.
Needles are available with optional anti-blood-reflection tips (to prevent blood backflow) and safety shields (to prevent needlestick injuries), complying with clinical safety regulations.
Eco-friendly products are provided (such as pilot programs for biodegradable materials), responding to the global trend toward green healthcare.

Quality and Certification Assurance:
Strict Quality Inspection Process:
Full Inspection Items: Leakage Test, Sealing Test, Scale Accuracy Verification, and Barrel Sliding Resistance Test. Third-party testing reports (such as SGS and TUV) are provided to ensure compliance with EN ISO 8536-1 standards.
Global Compliance Certifications
We hold CE, ISO, and CE certifications, enabling direct export to markets such as Europe, the United States, and Southeast Asia.
We are GMP (Good Manufacturing Practice) certified, meeting the regulatory requirements of various national drug regulatory agencies.

Service and Delivery:
Quick Response
We offer free or discounted sample trials and support small order quantities with flexible MOQs.
Short delivery cycles (e.g., 7-15 days) are available to meet unexpected needs (such as emergency procurement during the pandemic).
Localized Support
We have established warehousing centers in target markets (such as Europe and Asia) to shorten logistics times.
A multilingual technical support team (English, Spanish, Arabic, etc.) is available to assist customers with user issues.

Competitive Differentiation:
Cost Control: Compared to competing products, we reduce overall costs by 10%-15% through optimized injection molding processes and raw material procurement.
Long-Term Partnership Incentives: We offer a tiered pricing policy, annual purchase rebates, and strong customer relationships.